What is hydrogen rich water?
Hydrogen-Rich Water or hydrogen infused water contains active hydrogen ions that act as powerful antioxidants and anti-inflammatories in your body. The ions help eliminate oxygen free radicals that contribute to the development of illness and ultimately are responsible for the aging process.
H2Go Plus Stainless Water Bottle is a convenient 'take anywhere' hydrogen infusion unit. It infuses water with hydrogen gas in mere minutes. Use it at the office, in the gym, at home, in the car, or where ever you are! H2Go Plus Stainless bottle can even be charged via USB port from your car, computer, or portable power bank.
H2Go Plus Stainless Water Bottle Specifications
- PEM/SPE Technology
- CE, FDA, RoHs, and SGS Certified
- ORP is -400mV to -800mV
- Hydrogen concentration: 0.8-1.6ppm,
- 350ml Capacity
- Double Insulated Stainless Steel Body
- Electrodes: Titanium/Platinum
- High Pressure Cap
- Production time: 3 minute
- Separation of hydrogen and oxygen without ozone and residual chlorine. This feature is very important for a quality hydrogen bottle. Hydrogen ONLY is infused into the water. Oxygen and Chlorine are vented out the bottom of the unit. H2 water without ozone and chlorine is vastly healthier.
- Built in lithium battery, capacity :1400 mAh, 5V/1A
- Charging time: 2.5 hours (USB - cable supplied)
- 12 month warranty (base ONLY) damage to stainless body and cap is not warrantied unless damaged during delivery.
- With a single charge, you can use the unit aproximately 20 times per day before recharge is required.
- There is 3 LED signal lights. BLUE when producing the hydrogen water, RED when the unit is charging, and GREEN when unit is fully charged.
What is the benefit of Hydrogen Water ?
- Improves Metabolism
- Increases Energy Levels
- Eliminates Inflammation
- Provides Powerful Antioxidant Properties
- Boosts Immune System
- Has Anti-aging Properties
- Removes Muscle Fatigue
- Enhances Memory
- Reduces Lactic Acid
First Use after unpackaging:
After unpacking your H2Go Plus Stainless bottle, fill half full of water, and place on charge via USB cable. The bottle should light up RED while charging. Wait until lights turn GREEN before use. Then empty water and rinse unit out. DO NOT get base unit wet. Then simply fill unit back up with water, and press the button. Lights will then turn BLUE during operation, and automatically turn off and BEEP sound happens when infusion process is complete. For higher hydrogen concentration, the button can be pressed more than once, and cycle begins again. However, after second cycle, please crack cap to releive pressure if you wish to contine for a third time. Failure to releive pressure before 3rd cycle, will risk exploding cap off.
How to Clean H2Go Plus Stainless Unit:
Mix 50-50% water and household white vinegar, and fill unit half full. Leave for 2-4 hours (or best over night). Empty unit after appropriate time, and rinse thoroughly with clean water. Unit base can then be unscrewed from the body, and the body ONLY can be placed into dishwasher. Simply wipe base with soft clean damp cloth. Cleaning is recommended to be done at least once per month.